SRD:Mounted Combat (Rule)

This material is published under the OGL 1.0a.

Mounted Combat

Horses in Combat

Warhorses and war ponies can serve readily as combat steeds. Light horses, ponies, and heavy horses, however, are frightened by combat. If you don’t dismount, you must make a DC 20 Ride check each round as a move action to control such a horse. If you succeed, you can perform a standard action after the move action. If you fail, the move action becomes a full round action and you can’t do anything else until your next turn.

Your mount acts on your initiative count as you direct it. You move at its speed, but the mount uses its action to move.

A horse (not a pony) is a Large creature and thus takes up a space 10 feet (2 squares) across. For simplicity, assume that you share your mount’s space during combat.

Combat while Mounted

With a DC 5 Ride check, you can guide your mount with your knees so as to use both hands to attack or defend yourself. This is a free action.

When you attack a creature smaller than your mount that is on foot, you get the +1 bonus on melee attacks for being on higher ground. If your mount moves more than 5 feet, you can only make a single melee attack. Essentially, you have to wait until the mount gets to your enemy before attacking, so you can’t make a full attack. Even at your mount’s full speed, you don’t take any penalty on melee attacks while mounted.

If your mount charges, you also take the AC penalty associated with a charge. If you make an attack at the end of the charge, you receive the bonus gained from the charge. When charging on horseback, you deal double damage with a lance (see Charge).

You can use ranged weapons while your mount is taking a double move, but at a –4 penalty on the attack roll. You can use ranged weapons while your mount is running (quadruple speed), at a –8 penalty. In either case, you make the attack roll when your mount has completed half its movement. You can make a full attack with a ranged weapon while your mount is moving. Likewise, you can take move actions normally

Casting Spells while Mounted

You can cast a spell normally if your mount moves up to a normal move (its speed) either before or after you cast. If you have your mount move both before and after you cast a spell, then you’re casting the spell while the mount is moving, and you have to make a Concentration check due to the vigorous motion (DC 10 + spell level) or lose the spell. If the mount is running (quadruple speed), you can cast a spell when your mount has moved up to twice its speed, but your Concentration check is more difficult due to the violent motion (DC 15 + spell level).

If Your Mount Falls in Battle

If your mount falls, you have to succeed on a DC 15 Ride check to make a soft fall and take no damage. If the check fails, you take 1d6 points of damage.

If You Are Dropped

If you are knocked unconscious, you have a 50% chance to stay in the saddle (or 75% if you’re in a military saddle). Otherwise you fall and take 1d6 points of damage.

Without you to guide it, your mount avoids combat.

---

Back to Main Page → 3.5e Open Game Content → System Reference Document → Combat

Open Game Content (place problems on the discussion page).

This is part of the (3.5e) Revised System Reference Document. It is covered by the Open Game License v1.0a, rather than the GNU Free Documentation License 1.3. To distinguish it, these items will have this notice. If you see any page that contains SRD material and does not show this license statement, please contact an admin so that this license statement can be added. It is our intent to work within this license in good faith.